Configuring the management VLAN is covered later in this section. Click in the boxes beneath the port number as shown in Figure ref: figure-toggle-vlan-membership to toggle between the three VLAN options. The access ports on this VLAN are set to untagged while the trunk port is set to tagged. Change the PVID for each access port, but leave the trunk port and port used to access the switch management interface set to 1.
By default, all ports are members of VLAN 1 with untagged egress frames. To remove VLAN 1 from the other ports:. Remove VLAN 1 from all ports except the one used to manage the switch and the trunk port, to avoid being disconnected. In this example, port 8 is used to manage the switch. Plug systems into the configured access ports and test connectivity. If everything works as desired, continue to the next step. The management interface of Dell switches varies slightly between models, but the following procedure will accommodate most models.
The configuration is quite similar in style to Cisco IOS. Netgate Logo Netgate Docs. Note This is the bare minimum configuration needed for VLANs to function, and it does not necessarily show the ideal secure switch configuration for any specific environment. These tools can help you apply changes to device configurations in bulk. With Network Configuration Manager, you can configure a VLAN in your switches and start managing traffic efficiently, enhance security, and swiftly troubleshoot network issues.
You can configure VLANs in Network Configuration Manager with the help of configlets, executable configuration templates that help you automate repetitive and complex network operations. You can create custom configlets to suit your network and device requirements. Configlets can be created and executed using Network Configuration Manager in three different modes: file transfer, script execution, and advanced script execution.
To configure a VLAN, you can create the configlet in script execution mode. Toggle navigation. The introduction. X Platform: Catalyst Switches A VLAN is a group of end stations in a switched network that is logically segmented by function, team or application, regardless to the physical locations of the users.
To know how to assign an interface VLAN as an Access or Trunk port through the web-based utility of the switch, click here. Create the VLANs. To learn how to configure the VLAN settings on your switch through the web-based utility, click here. For instructions on how to configure the VLAN interface settings on your switch through the web-based utility, click here.
Assign interfaces to VLANs. For instructions on how to assign interfaces to VLANs through the web-based utility of your switch, click here. Step 1.
Log in to the switch console. If you have configured a new username or password, enter the credentials instead.
0コメント